Programming the parameter of the slip printer
* AB: Initial slip feed line (0 to 64)
CD: Slip print max. line no. (0 to 99)
E: Validation printing counter (1 thru 9 times)
To inhibit validation printing, enter 0.
F: Feed lines after printing of a tray subtotal (0 thru 9 lines)
Entering 009910 to ABCDEF
Setting the time limit for THE TILL TIMER
TM
The machine counts the number of times the drawer is left open for longer than a programmed time limit. The
counter will be incremented by one each time a programmed time limit is reached. The time limit for THE TILL
TIMER
TM
can be preset for 0 to 255 seconds. The count is printed on the general report and cashier report.
Setting the time limit as 30 (seconds).
2617
.@
30
a
PrintKey operation
To Next Page
Loading...
