Sharp ER-A420 - Cashier Report

163
Cashier report
Using this function, you can take X and Z reports for individual cashiers or all cashiers.
Individual cashier reading and resetting
The OP X/Z-mode reading and resetting is allowed only when your machine has been programmed
for "OP X/Z mode available" in the PGM2 mode.
• Sample X report • Sample Z report
Cashier no.
The subsequent printout occurs in the
same format as in the sample X report.
Cashier name
Customer counter
Sales total
Commission 1 sales total
Commission 1 amount
(commission 1 sales
total x commission 1 rate)
Commission amount total
Non-commission sales
total
Note
* When you take these reports in the OP X/Z mode,
the X report shows an “OP X” and the Z report
shows an “OP Z”.
ER-A410/A420(SEC)-4 03.12.22 0:20 PM Page 163