142
Programming for print data sending
* Item: Selection: Entry:
A Sensing of DR signal Yes 0
No 1
B Sensing of CS signal Yes 0
No 1
C Sending of all print data Disable 0
Enable 1
Programming the CAT interface
Phone number for dial out
* The valid characters for dialing are “0 – 9”, “W” and “,”.
Password for dial out
* The password can be programmed with zero suppression, however it is
used without zero suppression (00000000 - 99999999) for dialing.
Functional programming
* Item: Selection: Entry:
A PIN PAD on CAT for DEBIT CARD Yes 0
No 1
B Key type for PIN PAD STATIC 0
DUKPT 1
INDEX 2
C Dial mode for dial out Tone 0
Pulse 1
Time out setting for time 1 (reading the card)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
