Sharp MX-2600N Quick Start Guide

44
Copying an 11" x 17" size original without cutting off
the edges (11x17 Full Bleed)
Copying in the center of the paper (Centering)
Reversing white and black in a copy (B/W Reverse)
Adjusting red/green/blue in copies (RGB Adjust)
Adjusting the sharpness of an image (Sharpness)
Use this feature to make a full-size copy
of an 11" x 17" original on 12" x 18"
paper so that the edges are not cut off.
The original must be placed on the
document glass.
Use this function to position the copy
image at the center of the paper.
This is convenient when the image is
reduced or copied onto paper that is
larger than the original.
This function reverses black and white
in a copy to create a negative image.
Use this function to save toner when
copying an original with large black
areas.
Use this function to strengthen or weaken red, green, or blue (one color only) and thereby change the overall hue
of the copy.
An image of this function is shown at the end of this manual.
Use this function to sharpen or soften a copy image.
An image of this function is shown at the end of this manual.
02-1_Quick(Copy).fm 44 ページ ２００８年５月１４日 水曜日 午後１２時３５分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg