Sharp MX-2600N Quick Start Guide

45
Whitening faint colors in copies (Suppress
Background)
Adjusting the color (Color Balance)
Adjusting the brightness of a copy (Brightness)
Adjusting the intensity of a copy (Intensity)
Checking copies before printing (Proof Copy)
Checking the number of scanned original sheets
before copying (Original Count)
Use this function to suppress light background areas of a copy image.
When making a copy of an original that has a light colored background, this can be used to whiten the background.
An image of this function is shown at the end of this manual.
Use this function to adjust the color balance in a color copy. The densities of the four colors cyan, magenta, yellow,
and black can be adjusted.
An image of this function is shown at the end of this manual.
Use this function to adjust the brightness of a copy.
An image of this function is shown at the end of this manual.
Use this function to adjust the intensity of a copy.
An image of this function is shown at the end of this manual.
Regardless of the number of copies
specified, this function initially prints
only the first set. After you have
checked the first set, the remaining sets
are printed.
The number of scanned original sheets
can be counted and displayed before
copying is executed. By allowing you to
check the number of original sheets
that were scanned, this helps reduce
the occurrence of copy mistakes.
5 sets
1 set 4 sets
Check
4 sheets
4
sheets
4 sheets
Check
Scan
originals
02-1_Quick(Copy).fm 45 ページ ２００８年５月１４日 水曜日 午後１２時３５分

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg