1-116
BEFORE USING THE MACHINE
Contents
MACHINE SPECIFICATIONS / COPIER
SPECIFICATIONS
* First copy out time is measured with original on the document glass in full ready condition with fuser at operating
temperature and mirror motor at operating speed in each of black and white mode and colour mode, actual time may
vary based on environment conditions.
Name
Digital Full Colour Multifunctional System MX-C312
Type
Desktop
Display
7.0 inch colour touch panel LCD
Photoconductive type
OPC drum
Printing method
Electrophotographic system (laser)
Developer system
Dry-type two-component magnetic brush development
Fusing system
Heat rollers
Scanning resolution
Document glass
Black and white scanning: 600 x 300 dpi, 600 x 600 dpi
(factory default values)
Colour scanning: 600 x 300 dpi, 600 x 600 dpi
(factory default values)
Reversing single pass
feeder (automatic
document feeder)
Black and white scanning: 600 x 300 dpi (factory default values),
600 x 600 dpi
Colour scanning: 600 x 300 dpi (factory default values),
600 x 600 dpi
Printing resolution
600 x 600 dpi
Scanning gradation
256 levels
Printing gradation
Equivalent to 256 levels
Original sizes / types
Max. A4 (8-1/2" x 11") / sheets, bound documents
Copy sizes
Maximum: A4 (8-1/2" x 11") Minimum: A5 (5-1/4" x 5-3/4")
Print margins
Leading edge / trailing edge: total 8 mm (21/64") or less,
near edge / far edge: total 8 mm (21/64") or less
Warm-up time
90 seconds or less
(At room temperature of 73.4°F (23°C) and rated voltage)
First-copy time*
Colour copy time:8.9 seconds or less
Black and white copy time: 8.0 seconds or less
(Portrait feeding of A4 (8-1/2" x 11") sheets from 1st paper tray, without auto colour selection and auto
colour mode.)
Copy ratios
Variable: 50% to 200% in increments of 1%, total 151 increments
Fixed presets: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141% and 200% for AB sizes.
50%, 64%, 77%, 100%, 129% and 200% for inch sizes;
Two reduction ratios and two enlargement ratios can be stored.
Continuous copy
999 copies
To Next Page
Loading...
