Sharp MX-C312 User Manual

1-117
BEFORE USING THE MACHINE
Contents
Machine specifications / copier specifications (Continued)
* Type A connectors are located on the front and back right of the machine (two connectors); however, the connectors
cannot be used simultaneously. The connector on the back of the machine is not initially available for use. If you wish
to use the connector, contact your service technician.
Automatic document
feeder
See " Automatic document feeder specifications " (page 1-118).
Tray 1
Paper sizes: A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
7-1/4" x 10-1/2", 5-1/2" x 8-1/2", 16K
Paper weight: Plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to 28 lbs.))
Paper capacity: Plain paper (80 g/m
2
(21 lbs.)) 500 sheets
Paper types: SHARP-recommended plain paper, recycled paper and coloured paper
Bypass tray
Paper sizes: A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", envelopes, 16K (Includes automatic
paper size detection function. Paper sizes from 100 mm x 148 mm
(3-15/16" x 5-53/64") to 216 mm x 356 mm (8-33/64" x 14-1/64") can be entered.)
Paper weights:
Thin paper (55 g/m
2
to 59 g/m
2
(15 lbs. to 16 lbs.)), plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to 28 lbs.)),
heavy paper (106 g/m
2
to 209 g/m
2
(28 lbs. bond to 110 lbs. index)).
Paper capacity: Standard paper 100 sheets
Paper types:
SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper,
transparency film, and envelopes (Monarch, Com-10, DL, C5)
Duplex module
Paper sizes: A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
5-1/2" x 8-1/2", 16K
Paper weight: Plain paper (60 g/m
2
to 105 g/m
2
(16 lbs. to 28 lbs.))
Paper types: SHARP-recommended plain paper, recycled paper, and coloured paper
Output tray
(Centre tray)
Output method: Face-down output
Output capacity: 250 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper)
(The maximum number of sheets that can be held varies depending on ambient conditions in the
installation location, the type of paper, and the storage conditions of the paper.)
Tray full sensor: Yes
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Type A connector supports USB 2.0 (Hi speed)*
Compatibility requirements of USB 2.0
Memory Capacity: Max. 32 GB
Disk Format: FAT32 only
Type B connector supports USB 2.0 (Hi speed)
Required power
supply
Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of the
left side of the machine.)
Power consumption
1.84 kW (220-240 V) / 1.44 kW (100-127 V)
Dimensions
560 mm (W) x 493 mm (D) x 714 mm (H)
(22-3/64" (W) x 19-13/32" (D) x 28-7/64" (H))
Weight
Approx. 46 kg (101.4 lbs.)
Overall dimensions
868 mm (W) x 493 mm (D) (34-11/64" (W) x 19-13/32" (D))
(when bypass tray is extended)

Sharp MX-C312 Specifications

Power

power consumption	1.44 kW or less
power source	AC 100-127VAC, 60HZ, 12 AMPS

Copying Features

copy speed	31 ppm B&W/Color
first copy time	8.0 sec or less (B&W); 8.9 sec or less (color)
warm-up time	90 seconds or less

Scanning Features

scan speed	Up to 35 ipm (B&W or color)
optical resolution	600 dpi
output modes	600 dpi, 400 dpi, 300 dpi, 200 dpi, 100 dpi

Network Printing System

print resolution	1200 dpi, 600 dpi
print speed	31 pages per minute (Letter)
resident fonts	80 Outline Fonts

Inner Finisher

output capacity	Up to 280 sheets (Letter/Legal)
weight	Approx. 19.8 lbs
dimensions	18-2/3" (w) x 13-1/16" (d) x 6-3/16" (h)

Weight and Dimensions

weight	102 lbs
dimensions	22-3/64" x 17-1/4" x 28-7/64"