7-35
SYSTEM SETTINGS
Contents
Device Control
*1 When a 500-sheet paper feed unit is installed.
*2 When a finisher is installed.
*3 When a colour-related problem has occurred.
Item Factory default setting Page
■ Device Control
7-65
● Other Settings 7-65
X AB/Inch Type Setting AB (Inch) 7-65
X Default Original Size Settings Copy: None
Fax/Image Send: A4 (8-1/2" x 11")
Scan to HDD: A4 (8-1/2" x 11")
7-65
X Original Feeding Mode All Disabled 7-65
X Auto Paper Selection Setting Plain Paper 7-65
X Detect Standard in Auto Colour Mode 3 7-65
X Registration Adjustment – 7-65
X Optimization of a Hard Disk – 7-66
X Clear All Job Log Data – 7-66
● Disabling of Devices 7-67
X Disabling of Document Feeder Disabled 7-67
X Disabling of Duplex Disabled 7-67
X Disabling of Optional Paper Feed Unit*
1
Disabled 7-67
X Disabling of Tray Settings Disabled 7-67
X Disabling of Offset*
2
Disabled 7-67
X Disabling of Stapler*
2
Disabled 7-67
X Disabling of Colour Mode*
3
Disabled 7-67
● Fusing Control Settings 60 - 89g/m
2
(16 - 23 lbs.) 7-67
To Next Page
Loading...
