7-36
SYSTEM SETTINGS
Contents
Copy Function Settings
Item Factory default setting Page
■ Copy Function Settings
7-68
● Initial Status Settings
7-68
X Colour Mode Full Colour
X Paper Tray Tray 1
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Auto
● Other Settings 7-69
X Copy Exposure Adjustment
7-69 Colour 5
Black & White 5
X Add or Change Extra Preset Ratios – 7-69
X Setting a Maximum Number of Copies 999 7-69
X Initial Margin Shift Setting
7-69 Side 1 10 mm (1/2")
Side 2 10 mm (1/2")
X Erase Width Adjustment
7-69
Edge Clearance Width 10 mm (1/2")
X Card Shot Settings
7-69 Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
X Disabling Deletion of Job Programs Disabled 7-69
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-69
X Disabling of Auto Paper Selection Disabled 7-69
X Auto Selection of Paper Tray that was Last Loaded Disabled 7-70
X Colour 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-70
X Colour Quick Scan from Document Glass Disabled 7-70
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder Enabled 7-70
X B/W Quick Scan from Document Glass Disabled 7-70
● Colour Adjustments 7-71
X Initial Colour Balance Setting Factory default state 7-71
X Auto Colour Calibration – 7-71
To Next Page
Loading...
