Sharp SH-01K

142
Handset Settings
Illumination
The light performance is displayed on the screen when
receiving a call, charging starts, etc.
1
In the home screen, [ ]▶[Settings]▶[Display]
▶[Illumination]
2
Set to On
3
Select an item

For incoming call: Set whether to activate Illumination when
receiving a call.

Illumi pattern/color for incoming call: Make settings for a
flashing pattern or a flashing color of Illumination for when
receiving a call.

Notification: Set whether to make the incoming lamp flash if
there are missed calls and new mails.
y
For details on the flashing color of the incoming lamp etc.
☞
P. 52 “Incoming/Charging lamp”

When start charging: Set whether to activate Illumination
when charging starts.

When unlocking: Set whether to activate Illumination when
unlocking the touch panel.

When ending a call: Set whether to activate Illumination
when ending a call.
VeilView
You can prevent others from seeing the display.
1
In the home screen, [ ]▶[Settings]▶[Display]
▶[VeilView]
2
Select an item

VeilView: Set whether to enable VeilView.

Pattern setting: Set the display pattern.

Density setting: Make an adjustment for the effect (shading)
to prevent others from seeing the display.
[VeilView]
z
[VeilView] is disabled if the power is turned off.
[Pattern setting]
z
The effect of preventing others from seeing may differ
depending on the selected patterns.