Sharp SH-01K

17
Contents/Precautions
Material list
Handset
Part Material/Surface treatment
Display side
Reinforced glass/Antifouling
coating
Surrounding area of display
side
PA resin (With glass)/Coating,
Hard coating
Back
PC resin + ABS resin/Coating,
Printing, Soft touch coating
Power key Aluminum/Anodizing
Volume up/down key Aluminum/Anodizing
Fingerprint sensor Epoxy resin/Hard coating
Camera panel
Acrylic resin + PC resin/Hard
coating
Mobile light PC resin
Earpiece/Speaker mesh PC resin
docomo nano UIM Card and
microSD Card tray (Exterior
section)
PC resin/Coating, Soft touch
coating
docomo nano UIM Card and
microSD Card tray
POM resin
Gasket of docomo nano UIM
Card and microSD Card tray
Silicon rubber
docomo nano UIM Card and
microSD Card tray slot
PA resin (With glass)
IMEI plate PET resin/Printing
Handling precautions
General notes
z
SH-01K is waterproof/dustproof, however, do not allow liquid
such as water (drinking water, sweat, seawater, pet urine,
etc.) and foreign object such as dust to get inside the
handset and do not allow them to adhere to optional parts.
The adapter and docomo nano UIM card are not waterproof/dustproof.
Do not use in humid or steamy areas such as bathrooms and avoid
exposing to rain and other forms of moisture. If they are carried close
to the skin, perspiration may cause internal components to corrode
and result in malfunction. If a problem is found to be due to moisture,
the handset and parts are not covered by warranty. For details on
repair, contact the number listed in “Repairs” (in Japanese only) on the
last page or a repair counter that DOCOMO specifies.
z
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
y
Forceful rubbing of the display may scratch its surface.
y
Water drops, dirt, etc. left on the display may cause stains to form
on its surface.
y
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
z
Occasionally clean terminals, the fingerprint, etc. and always
keep it.
When using unclean terminals etc., the handset may not work
properly.
Be careful not to damage to terminals etc. while cleaning them.
z
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may cause
internal corrosion and lead to a malfunction.