188
International Roaming
International Dial Assist
1
In the home screen, [ ]
2
[ ]▶[Call settings]
3
[Roaming settings]
4
[International dial assist]
5
Select an item
Automatic conversion: Automatically add the international
prefix or country code.
Country code: Select the country code used in Automatic
conversion.
International prefix: Select the international prefix used in
Automatic conversion.
Network services (overseas)
You can make settings for network services such as Voice Mail
Service used in your country of stay.
z
It is necessary that Remote operation settings is set to “Active” in
advance (
☞
P. 82 “Network service”).
z
When you operate this service from overseas, charges for
connecting a call to Japan from your country of stay are incurred.
z
Setting may not be made depending on the network operator.
1
In the home screen, [ ]
2
[ ]▶[Call settings]
3
[Roaming settings]
4
[Network service]
5
Select a target service
Remote operation (charges apply): Set whether to start
remote operations.
Caller ID notification request service (charges apply): When
a call with no caller ID is received, play the guidance for
requesting notifications of the numbers to callers.
Incoming call notification while roaming (charges apply):
Notify with SMS if you cannot receive calls because of out of
service etc. during international roaming.
Roaming guidance (charges apply): Play the guidance
notifying the other party who makes a call to you during
international roaming that you are using international roaming.
Voicemail service (charges apply): Record callers' messages
when the handset is outside the service area or turned off
(subscription is required).
Call forwarding service (charges apply): Forward calls to other
mobile phones registered in advance (subscription is required).
6
Follow the instructions on the screen and operate
7
Follow the voice guidance and operate
Checking after homecoming
The handset automatically connects to the DOCOMO network
after returning to Japan. If it fails, make the following settings.
z
Set Preferred network type to [4G/3G/GSM(Auto)] (
☞
P. 184
“Preferred network type”).
z
Set Network operators to [Select automatically] (
☞
P. 185
“Network operators”).
To Next Page
Loading...
