169
Handset Settings
Text-to-speech output: Make settings for the voice for reading
the characters displayed on the handset.
Touch & hold delay: Set how long you need to keep touching.
Color inversion: Set whether to invert colors displayed on the
screen.
Color correction: Make settings for the adjustment of colors
displayed on the screen.
z
For details on using other accessibility services, follow the
instructions on the screen.
[Power button ends call]
z
If the display is turned off according to the setting of [Sleep],
press 0 to turn it on. Press 0 while the display is turned
on to end the call.
Printing
You can print with an app supporting the print function by
installing a print app (plug-in). To change settings on the
installed print app (plug-in), carry out the following operations.
z
Install a print app (plug-in) supporting a printer to use in
advance.
1
In the home screen, [ ]▶[Settings]▶[Printing]
2
Select a print service
z
Follow the instructions on the screen and operate after this
step.
About phone
You can check the information about the handset.
1
In the home screen, [ ]▶[Settings]▶[About
phone]
2
Select an item
Build number: Check the build number.
Status: Check the battery level, network in use, etc.
Self check: For details
☞
P. 170 “Self check”
Adjust sensitivity of sensor: Adjust the accuracy of retrieval
by the motion sensor and geomagnetic sensor.
Software Update: For details
☞
P. 198 “Software update”
Legal information: Check copyright notice, terms of service,
etc.
Authentication: Check information such as the certification of
conformity with technical regulations.
Model number: Check the model number.
Android version: Check the Android version.
Android security patch level: Check when the loaded security
patch is released.
Baseband version: Check the baseband version.
Kernel version: Check the kernel version.
[Adjust sensitivity of sensor]
z
Make the adjustment approximately 10 seconds after the
adjustment screen appears.