Sharp SH-01K

39
Before Using the Handset
Charging with USB cable
You can charge the handset by connecting the handset to a
PC with USB cable A to C 01 (sold separately) etc.
z
For details on connecting to a PC
☞
P. 179 “PC connection”
Turning power on/off

Turning power on
1
0 (for at least 3 seconds)
z
When you turn the power on for the first time, make the initial
settings (
☞
P. 51 “Initial settings”).

Turning power off/Reboot/Emergency mode
1
0 (for at least 2 seconds)
2
Select an item

Power off: Turn off the handset.

Restart: Reboot the handset.

Emergency mode: For details
☞
P. 43 “Emergency mode”

Turning display on/off
The display is turned off when 0 is pressed or the handset is not
in use for a set length of time.
Press 0 while the display is turned off to turn it on.

Touch panel lock
When the power or the display is turned on, the touch panel is
locked.
Touch [
] to unlock.
z
An image for the lock screen of the touch panel is automatically
switched every time the display is turned on.
If you set [Lock Photo Shuffle] to OFF, it is not automatically
switched (
☞
P. 140 “Display”).
Operations in touch panel lock screen
z
To activate Camera: [ ]
z
To activate しゃべってコンシェル (Shabette-Concier): [
]
z
To activate Clock: Touch the clock
z
To display the detailed information on notifications: Drag the
clock down
z
To display the status panel: Drag the status bar down