Sharp SH-01K

78
Call
Operation during a call
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the usage
condition during a call.
Voice call screen
Video call screen
1 Other party's name and phone number
2 End call
z
End a call.
3 Call time
4 Dialpad
z
You can enter touch-tone signals.
5 Mute
z
Enable or disable the mute setting on a current call.
6 Speaker
z
You can talk with hands-free.
z
When a Bluetooth device is connected, you can switch audio
output ports.
7 Switch to video
z
Switch to a video call.
8 The other party's image
9 Your own image
a Switch camera
z
Switch to the front camera/back camera.
z
Note the followings to use hands-free or video call.
y
Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
y
When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use an earphone/
microphone.
y
If the sound breaks up during a hands-free call, lower the
in-call volume.