Sharp SH-01K

150
Handset Settings

Wi-Fi settings
1
In the home screen, [ ]▶[Settings]▶[Wi-Fi]▶
[ ]
2
Select an item

Saved networks: Display the access point that you have
accessed.

Network notification: Set whether to display a notification
icon when an open network is detected.
y
Set it after setting [Wi-Fi] to On.

Wi-Fi sleep policy: Set whether to disconnect Wi-Fi when the
display is turned off.

Avoid poor connections: Set whether to use the Wi-Fi
function only when stable Internet connections are available.

Internal IP phone settings: Make settings for Internet call.

MAC address: Confirm the MAC address.

IP address: Confirm the IP address.

Wi-Fi detailed settings
1
In the home screen, [ ]▶[Settings]▶[Wi-Fi]
2
[ ]▶[Advanced]
3
Select an item

Install certificates: Install certificates.

Wi-Fi Direct: Make settings for Wi-Fi Direct.

WPS Push Button: Set the Wi-Fi with WPS Push Button.
y
Push the WPS button of the access point. An access point
is detected and registered automatically.

WPS Pin Entry: Set the Wi-Fi with WPS PIN.
y
Input the PIN displayed on the screen to the access point.
z
The registration process using WPS takes a few minutes. After
completion of the registration of the access point, check that
the proper connection to the access point is acquired.

Deleting access point settings
1
In the home screen, [ ]▶[Settings]▶[Wi-Fi]
2
Select an access point already set▶[FORGET]
▶[YES]