6
6OPERATION
6.1 Outline
6.1.1 Introduction
6.1.2 Operation Flowchart
6.2 Start-up Preparation
6.2.1 Start-up Preparation Sequence in LOCAL Mode
6.2.2 Start-up Preparation Sequence in REMOTE
Mode
6.3 Start-up
6.3.1 Start-up Sequence in LOCAL Mode
6.3.2 Start-up Sequence in REMOTE Mode
6.4 Shutting Down
6.5 Variable Speed Operation
6.5.1 Outline
6.5.2 Operation from Start-up to Low Speed Rotation
6.5.3 Operation from Rated Speed Rotation to Low
Speed Rotation
6.5.4 Operation from Low Speed Rotation to Rated
Speed Rotation
6.6 Software Operation
6.7 Remote-Control Connector
6.7.1 Specifications
6.7.2 Compatibility with Previous Models
To Next Page
Loading...
