EN-12 Original User Guide | Pedelec Shimano Steps E6000 Version 1
CAUTION
Donotopenupthemotor,display,batteryorchargeras you could
injure yourself. Parts might also be damaged beyond repair,
invalidating the warranty. Contact your cycle dealer when problems
arise.
IMPORTANT
Alwaysparkyourpedelecsothatitcannottipover.Components can
be damaged if the bike tips over. If your bike is not equipped with
a kick stand, one can be tted if required. Please contact your cycle
dealer.
Donotcleanthepedelecwithawaterhoseorhighpressurewasher.
Although the components are sealed, damage to the cycle may still
result. Clean the pedelec with a soft damp cloth.
DANGER
Onlyuseoriginalreplacementparts. Replacement parts from other
manufacturers can impair the function of your pedelec. Serious acci-
dents can result.
Askyourcycledealertoshowyouhowtouse,andexplain,the
specialfeaturesofthecomponents.Pleasealsofollowthecomponent
guides.Werecommendaskingyourcycledealertoassembleand
adjustthebike. Otherwise, components could become loose due
to a faulty assembly. If this happens whilst you are cycling, you
could injure yourself very seriously or even die. If you do have to
tighten something yourself, a full list of torque settings is in Section
8. Torque settings Page EN-46 (strict adherence to which is a
requirement).
WARNING
Donotrideinunfavourablelightingconditions(fog,rain,dusk,
darkness)withoutadequatelights IV.II.I Lights Page EN-8. Failure
to do so can result in accidents and serious injuries.
Alwaysremovethebatterybeforestartingtoworkonthepedelec.
The pedelec could switch on unexpectedly and you could be seriously
injured.