Copyright © Shimmer 2017
Realtime Technologies Ltd Shimmer User Manual
All rights reserved Rev3p
56
PC cannot access SD card via Dock
If you experience difficulties accessing the microSD card, please consult the Troubleshooting section
of the Shimmer Dock User Guide (v1.5 or later) which can be obtained from the folder
\Documentation\Hardware User Guides in the Shimmer User Resources distribution or from our
website.
Magnetometer value jumps to -4096
Why does a Shimmer3 magnetometer axis sometimes read as -4096?
In the event of a data overflow on a magnetometer axis - as would be the case if the local magnetic
field strength exceeds the configured magnetometer range - the axis channel will read as a value of -
4096 in 2s complement form. To overcome this, simply increase the magnetometer range.
To Next Page
Loading...
