Need help?Do you have a question about the Shimmer 3 and is the answer not in the manual?
General| Accelerometer Range | ±2g, ±4g, ±8g, ±16g |
|---|---|
| Resolution | 16-bit |
| Wireless Connectivity | Bluetooth |
| Sensors | Accelerometer, Gyroscope, Magnetometer, ECG, EMG, GSR |
| Operating Temperature | -20°C to 60°C |
| Power | Rechargeable Li-Po battery |
| Gyroscope Range | ±250°/s, ±500°/s, ±1000°/s, ±2000°/s |
| Magnetometer Range | ±1.3 Gauss, ±1.9 Gauss, ±2.5 Gauss, ±4.0 Gauss |
| Storage Temperature | -20°C to 60°C |
| Charging Time | 2 hours |
Details about the FCC compliance and marking requirements for the Shimmer device.
Instructions for turning the Shimmer device on and off using the slide switch.
Explanation of LED indicators on the Shimmer3 for LogAndStream firmware status.
Guide on how to charge the Shimmer unit using the Shimmer Dock.
Procedure for establishing a Bluetooth connection by pairing the Shimmer with a host device.
Step-by-step guide for pairing a Shimmer with a Windows operating system.
Instructions for pairing a Shimmer device with a Linux operating system.
Guide to configuring and establishing a data stream from the Shimmer.
Steps for setting up a Shimmer data stream using ShimmerCapture on Linux.
Procedure for setting up a Shimmer data stream using ConsensysPRO on Windows.
Overview of the key hardware components and capabilities of the Shimmer3 platform.
Description of the Shimmer Dock's functions: charging, microSD access, and programming.
Instructions for downloading and installing necessary USB serial converter drivers for the Dock.
How to properly insert the Shimmer unit into the Shimmer Dock for connection.
Details on the Shimmer charging process via the Dock, including LED indicators.
Information on accessing the Shimmer's microSD card through the Dock.
Steps for programming firmware onto a Shimmer unit using a Dock or Base.
Overview of the Consensys Base hardware for multi-sensor management.
Details on different Shimmer sensing units and their specific user guides.
Guidelines for maintaining the Shimmer device, including cleaning and inspection.
Introduction to Shimmer's software applications for data capture and management.
Overview of software for streaming Shimmer data over Bluetooth, like Consensys.
Details on the ShimmerCapture application for Android devices.
Information on the Multi Shimmer Sync application for Android.
Procedure for calibrating Shimmer sensors using dedicated applications.
Introduction to Shimmer's software development tools and APIs for custom applications.
Overview of available Shimmer firmware solutions for various functionalities.
Details on the SDLog firmware for logging data to the Shimmer's onboard SD card.
Description of simple Shimmer firmware applications like Blink and Sleep.
Methods for programming firmware onto a Shimmer device.
Step-by-step guide to programming Shimmer firmware using Consensys on Windows.
Prerequisites and steps for programming Shimmer firmware on a Linux system.
An overview of the Shimmer3 hardware architecture and its core components.
Functional descriptions of Shimmer's communication, storage, and power subsystems.
Information about the microSD card socket and its functionality on the Shimmer3.
Details on the Shimmer unit's power system, including battery and power states.
Troubleshooting steps for resolving Bluetooth connection issues with the Shimmer device.
Steps to resolve issues with accessing the Shimmer's SD card through the dock.
Detailed information on the Shimmer3 mainboard components for debugging and testing.
Pin assignments for the external expansion connector on the Shimmer3 mainboard.
Pin connections for the CPU on the Shimmer3 mainboard for developer use.
Information on clock drift variations between Shimmer devices and its implications.
Information regarding compatibility issues with legacy Shimmer hardware.
Instructions for opening and reassembling the Shimmer3 device enclosure.
Step-by-step guide for correctly assembling the Shimmer3 device enclosure.
To Next Page
