SYSTEM DESCRIPTION 3
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
If fixed scale values are defined for the VMS5200, the fix option is to be marked on the
system identification label. The associated dimension values with unit of measurement
(mm or inch) must be specified in indelible ink. The LMS4x21 2D LiDAR sensor type
labels must be affixed in the appropriate fields.
The type label for the SIM2000-2 Prime controller must be affixed to the metrology
information label in the appropriate field.
Fig. 22: Information labels for the VMS5200 for fixed scale values with affixed type labels
Legend
1 System information labels with fixed scale values
2 Metrology information label with affixed type label
System information
labels with fixed scale
values
To Next Page
Loading...