SICK VMS4200 - 2 D LiDAR Sensors Connection

COMMISSIONING 6
77
8026364 / V1-0/2022-03|SICK
Subject to change without notice
SUPPLEMENTARY OPERATING INSTRUCTIONS | VMS4200/5200
▸
Start SOPAS using the desktop icon or the Windows Start menu.
A new project is automatically created in SOPAS ET. One or more devices are combined
and edited in a single project.
▸
Change the IP address of the configuration PC to the address range of the connected
2D LiDAR sensors.
▸
Click on the Search settings button. The Connection Wizard helps you establish a
connection to a connected device.
▸
Select the Search using device family option and click Next to confirm.
Launching SOPAS
Adjusting the
IP address of the
first LMS4x21
Starting the device
search