ENGLISH
18 610.40 064.01 Siemens AG
Fig. 9 Example of arrangement of the torque bracket on the side of the
gear (GS) 2; Eye of the torque bracket in the GS4 direction.
2.2 Scope of Delivery
The drive systems have been assembled individually, they have been tested and prop-
erly packed in the works.
Upon receipt of delivery, check that the delivery is complete, check for transport damage,
and whether the scope of delivery corresponds with the consignment notes.
SIEMENS cannot accept any liability for any shortages or deficiencies reported at a later
date. Any complaints must be reported to the transport company without delay.
Complaint instructions:
- Report detectable transport damage immediately to the carrier/transport company,
- Report detectable defects / incomplete delivery immediately to the responsible
SIEMENS representative.
The operating manual is part of the scope of delivery and shall therefore be kept in an
accessible place. As the delivery includes a separate type plate, the motor data must also
be kept on or near the machine or system.
To Next Page
Loading...
