Siemens 1FK7 Series Instructions

ENGLISH
Siemens AG 610.40 064.01
21
3.2.2.2 Bevel wheel gear
3.2.2.3 Flat gear
3.2.2.4 Circular gear
3.2.3 Motor adapter
3.2.3.1 Motor adapter with curved tooth clutch
3.2.3.2 Motor adapter with plug-in connector, zero-backlash
Lubricant see rating plate
Oil filling quantity see rating plate
Venting (lockable)
- gear sizes 1 to 4
- gear sizes 5 to 10
- without bleeding
- with bleeding
Transport lifting tackle Lifting eyes (for gear sizes 5 to 10 only)
Lubricant see rating plate
Oil filling quantity see rating plate
Venting (lockable)
- gear sizes 1 to 4
- gear sizes 5 to 6
- without bleeding
- with bleeding
Transport lifting tackle Borehole for lifting eyes on the gearbox
frame
Lubricant see rating plate
Oil filling quantity see rating plate
Venting (lockable)
- gear sizes 0 to 5
- gear sizes 6 to 10
- without bleeding
- with bleeding
Transport lifting tackle Lifting eyes (for gear sizes 7 to 10 only)
Operating temperature - 30 °C to 100 °C
Continuous operating temperature 80 °C (max. peak temperature 120 °C)
Motor shaft with key
Operating temperature - 30 °C to 100 °C
Continuous operating temperature 80 °C (peak temperature max. 120 °C)
Motor shaft without key

Siemens 1FK7 Series Specifications

General

Product type	Synchronous motor
Encoder	Incremental encoder, absolute encoder
Cooling method	Natural cooling, forced-air cooling
Degree of protection	IP64, IP65
Speed range	Up to 9000 rpm
Feedback system	Encoder or resolver