Siemens 1FK7 Series Instructions

ENGLISH
Siemens AG 610.40 064.01
9
This manual contains notes which you should observe to ensure your own personal
safety, as well to protect the product and connected equipment. Notices relating to your
personal safety are highlighted by a warning triangle. Notices solely relating to material
damage do not have an accompanying triangle. They are shown as follows according to
the degree of danger involved.
DANGER
Pictogram
indicates an imminently hazardous situation which, if
not avoided by the appropriate precautionary
measures, will result in death, serious injury or
substantial material damage.
WARNING
Pictogram
indicates an imminently hazardous situation which, if
not avoided by the appropriate precautionary
measures, could result in death, serious injury or
substantial material damage.
CAUTION
Pictogram
used with the warning triangle indicates a potentially
hazardous situation which, if not avoided, may result
in minor or moderate injury.
CAUTION
used without the warning triangle indicates a potentially hazardous
situation which, if not avoided, may result in damage to property.
NOTICE
indicates that an undesirable result or event may occur if the notice
is not observed.

Siemens 1FK7 Series Specifications

General

Product type	Synchronous motor
Encoder	Incremental encoder, absolute encoder
Cooling method	Natural cooling, forced-air cooling
Degree of protection	IP64, IP65
Speed range	Up to 9000 rpm
Feedback system	Encoder or resolver