Configuring
Application Module FM 458-1 DP - User Manual 4-73
A5E01078222-02 Edition 03.2009
The following sections explain, using examples, how to re-format an
Excel table to obtain the required table format.
The file example, shown in the following diagram, is formatted step-by-
step corresponding to the specifications of the required table format.
Fig. 4-38 An example of a table in MS Excel
(1) Header
Initially, the required header is inserted. To do this, 5 lines are inserted at
the beginning and the following data is entered:
DATA_BLOCK DB 1 [number of the DB]
TITLE = [enter as required]
VERSION : 0.1 [version data]
The Excel table with inserted header is shown in the following diagram:
From Excel to STL
To Next Page
Loading...
