Configuring
Application Module FM 458-1 DP - User Manual 4-89
A5E01078222-02 Edition 03.2009
Additional table files can be added or imported or deleted at any time.
The D7-SYS additionalComponentBuilder automatically takes-over the
management of the table files and saves the modified component files.
When opening existing components, "C:\temp“ is the standard search
path of the D7-SYS additionalComponentBuilder. If another path is
selected, when the program re-starts, this is used a standard search
path.
4.7.4.3 Downloading
After the component file was set-up with the D7-SYS
additionalComponentBuilder, it can be downloaded into the general
download dialog box.
(1) Opening the download dialog box in D7-SYS with “target
system Download”
Using this dialog box, the current configuring can download the optional
components into a memory card (offline/online).
Fig. 4-55 Download dialog box via target system
Downloading into D7-SYS
Opening
To Next Page
Loading...
