Siemens 6DD1607-0AA2 User Manual

Configuring
4-88 Application Module FM 458-1 DP - User Manual
A5E01078222-02 Edition 03.2009
The new component file can be set-up after the settings have been
completed.
The new component file is, as standard, set-up in C:\temp. If another
memory path is specified, then when the program re-starts, this is used
as standard memory path.
Fig. 4-53 Saving the new component file
Table files can now be added. A file selection window is opened using
with which the required table files can be selected.
NOTE
Only tables with a uniform value format can be included in a component
with the "table" type description! This means that a REAL table only
contains tables with REAL values.
The following diagram shows the contents of the D7-SYS
additionalComponentBuilder after importing the two generated table files:
Fig. 4-54 D7-SYS additionalComponentBuilder with imported table files
Saving

Siemens 6DD1607-0AA2 Specifications

General

Brand	Siemens
Model	6DD1607-0AA2
Category	Control Unit
Language	English