Application Module FM 458-1 DP - User Manual 1-1
A5E01078222-02 Edition 03.2009
1 Definitions and Support
1.1 Definitions
These Operating Instructions do not contain all of the detailed information
for all product types for reasons of transparency. This means that they
cannot take into account all conceivable situations regarding the
configuration, operation or service. If you require additional information,
or if specific problems occur, which are not handled in sufficient detail in
the Operating Instructions, then you can request the necessary
information from your local Siemens Office.
We would also like to point-out, that the contents of the operating
instructions are neither part of an earlier or existing agreement, statement
or legal relationship, nor do they change this. All of the contractual
responsibilities of Siemens AG are specified in the purchase contract
which includes the complete and exclusively valid warranty. The
contractual warranty is neither expanded nor restricted by the information
provided in these Operating Instructions.
For the purpose of these Operating Instructions and product labels, a
„Qualified person“ is someone who is familiar with the installation,
mounting, start-up and operation of the equipment and the hazards
involved. He or she must have the following qualifications:
1. Trained and authorized to energize, de-energize, clear, ground and
tag circuits and equipment in accordance with established safety
procedures.
2. Trained in the proper care and use of protective equipment in
accordance with established safety procedures.
3. Trained in rendering first aid
CAUTION
The boards contain components which can be destroyed by
electrostatic discharge. Prior to touching any electronics board, your
body must be electrically discharged. This can be simply done by
touching a conductive, grounded object immediately beforehand (e.g.
bare metal cabinet components, socket protective conductor contact).
General
information
Qualified personnel
To Next Page
Loading...
Need help?
General
