Siemens 6DD1607-0AA2 - Incremental Encoder Settings

Product description
2-26 Application Module FM 458-1 DP - User Manual
A5E01078222-02 Edition 03.2009
2.2.5 Incremental encoder settings
Switches S1 and S3 are used to change over between 15V and 5V
encoders. Tracks A/VW and B/RW have a common switch, track N/- of a
channel has its own switch, which can be used to set the appropriate
encoder type:
 Switch open (OFF): 15 V encoder: Switching threshold = 7 V
 Switch closed (ON): 5 V encoder: Switching threshold = 0 V
15 V encoders 5 V encoders
Encoder Switch Switch
Channel Track Numbr Position Numbr Position
Encoder 1 A / VW
B / RW
S1, 1 OFF S1, 1 ON
N / - S3, 1 OFF S3, 1 ON
Encoder 2 A / VW
B / RW
S1, 2 OFF S1, 2 ON
N / - S3, 2 OFF S3, 2 ON
Encoder 3 A / VW
B / RW
S1, 3 OFF S1, 3 ON
N / - S3, 3 OFF S3, 3 ON
Encoder 4 A / VW
B / RW
S1, 4 OFF S1, 4 ON
N / - S3, 4 OFF S3, 4 ON
Encoder 5 A / VW
B / RW
S1, 5 OFF S1, 5 ON
N / - S3, 5 OFF S3, 5 ON
Encoder 6 A / VW
B / RW
S1, 6 OFF S1, 6 ON
N / - S3, 6 OFF S3, 6 ON
Encoder 7 A / VW
B / RW
S1, 7 OFF S1, 7 ON
N / - S3, 7 OFF S3, 7 ON
Encoder 8 A / VW
B / RW
S1, 8 OFF S1, 8 ON
N / - S3, 8 OFF S3, 8 ON
Table 2-19 Switch settings for 5 V- and 15 V encoders
!
WARNING
When the switch is closed (on), the input voltage may not exceed the
voltage range of the 5V encoder, as otherwise the module would be
thermally overloaded.
Switch S1 and S3
8
7
6
5
4
3
2
1
OFF ON