Product description
Application Module FM 458-1 DP - User Manual 2-25
A5E01078222-02 Edition 03.2009
X3 Designation SU12 SB10 SB61
36 Binary input 9 1 1/51 1,11/51
37 Binary input 10 2 2/52 2,12/52
38 Binary input 11 3 3/53 3,13/53
39 Binary input 12 4 4/54 4,14/54
40 Binary input 13 5 5/55 5,15/55
41 Binary input 14 6 6/56 6,16/56
42 Binary input 15 7 7/57 7,17/57
43 Binary input 16 8 8/58 8,18/58
44 - 9 1P 1P
45 Ground, external 10 1M 1M
Table 2-17 Terminal assignments of the interface module at connector X3,
SC62 cable end D
X3 Designation SU12
21 Abs. value encoder 3 data D+ 1
22 Abs. value encoder 3 data D- 2
23 Abs. val. encoder 3 clock cycle C+ 3
24 Abs. val. encoder 3 clock cycle C- 4
25 Ground, encoder SSI 5
46 Abs. value encoder 4 data D+ 6
47 Abs. value encoder 4 data D- 7
48 Abs. val. encoder 4 clock cycle C+ 8
49 Abs. val. encoder 4 clock cycle C- 9
50 Ground, encoder SSI 10
Table 2-18 Terminal assignments of the interface module
at connector X3, SC62 cable end E
NOTE
In order to increase the noise immunity, the ground of the analog
and binary signals must be connected to the ground at the subrack
through the shortest possible distance.
You will find additional information on the interface modules in
Catalog ST DA.
Terminal
assignment at
cable SC62, end D
Terminal
assignment at
cable SC62, end E
To Next Page
Loading...
