Siemens 6DD1607-0AA2 User Manual

Configuring
Application Module FM 458-1 DP - User Manual 4-93
A5E01078222-02 Edition 03.2009
4.8 Parameter access technique for D7-SYS
4.8.1 General description of the parameter functionalityinformation
By appropriately parameterizing using operator control devices for
parameters at the block I/O:
 Reading values
 Changing values
 Changing values and saving in the CPU change (cache) memory
 Changing interconnections using BICO technology
 Changing interconnections and saving in the CPU change (cache)
memory
 Reading parameter descriptive elements
You can be used for the Parameter access technique following hardware
platforms:
 T400 technology module
 Application module FM 458-1 DP
 SIMADYN D standard CPUs
NOTE
Masterdrives operator control devices, for example, OP1S or
“DRIVE ES”/“DRIVE Monitor“ can be used for parameterization.
4.8.1.1 Parameters
When the parameter access technique for D7-SYS you designate block
inputs or outputs as parameter.
There are two types of parameters:
 Monitoring parameters
 These can be configured at the inputs and outputs of blocks
 Values can only be read.
Hardware
platforms

Siemens 6DD1607-0AA2 Specifications

General

Brand	Siemens
Model	6DD1607-0AA2
Category	Control Unit
Language	English