Configuring
Application Module FM 458-1 DP - User Manual 4-75
A5E01078222-02 Edition 03.2009
Fig. 4-40 Example of a table in MS Excel with inserted structural data and tabular values
(3) Saving as STL [AWL] file
Finally, the correctly formatted file only has to be saved as text file with
the extension *.AWL. In this case, the following should be selected in MS
Excel "File Save as...". "Formatted text (separated by blanks) (*.prn)"
file type should be selected and the table example should be saved
under a freely selectable name and location.
"Save as" window in MS Excel with the appropriate selection is shown in
the following diagram:
To Next Page
Loading...
