Configuring
4-118 Application Module FM 458-1 DP - User Manual
A5E01078222-02 Edition 03.2009
6. Setting-up tags: Select the connection that has just been set-up
using the righthand mouse key and select "New Tag" in the menu that
is displayed.
7. In the dialog box that opens, enter a variable name (e.g. function
block name_connection name, however, any other name can also be
specified).
The data type of the selected connector, taken from the CFC
configuring or from the address book
created, can be set under "Data Type" (a reference table of the
various data types can be found later on).
The address dialog box is opened by pressing the "Select" button.
The DB number and the offset are specified in this address dialog
box. Take this data for the particular connection from the address
book created when the CFC was compiled (refer to the next
screenshot).
To Next Page
Loading...
