Configuring
Application Module FM 458-1 DP - User Manual 4-135
A5E01078222-02 Edition 03.2009
If the connection parameters are to be checked, then click on
"Connection". This is not absolutely necessary if "NetPro" has been
correctly configured. However, if various couplings are used (TCP/IP,
MPI or DP) then the required connection should be selected.
Then click on "Continue":
For smaller projects, "All" can be transferred each time. However, for
larger projects, this would involve significant delays and it is
recommended that "Changes Only" are mapped (transferred).
Then click on "Continue":
To Next Page
Loading...
