Siemens 6DD1607-0AA2 - Page 37

Product description
Application Module FM 458-1 DP - User Manual 2-29
A5E01078222-02 Edition 03.2009
Number 5
Version Differential inputs
Electrical isolation No
Input voltage range - 10 V to + 10 V
Resolution 12 bit
Conversion time per channel, max approx.10 µs – 100ksps sampling
rate
Accuracy
 Integral linearity error, max.
 Gain error, max.
 Offset error, max.
  1/2 LSB
  0.3 %
  10 LSB
Input resistance
20 k
Input filter 34 kHz
Incorrect polarity protection No
Number 8
Electrical isolation No
External power supply
 Nominal voltage
 Permissible range
 Briefly
 Max. current drain, without load
 24 V
 20 V to 30 V
 35 V (for max. 0.5 sec.)
 20 mA
Output voltage range
 For a 0 signal, max.
 For a 1 signal, min.
 3 V
 ext. power supply voltage, – 2.5 V
Output current
 For a 0 signal, min.
For a 1 signal
 Nominal value
 Brief, permissible range, max.
 -20 µA
 30 mA
 100 mA
Delay time 100 µs
Switching frequency of the outputs
for ohmic load, max.
6 kHz
Short-circuit protection with respect to
 Ground
 External power supply
 Yes
 No
Short-circuit current, max. 250 mA
Total currents of the outputs 8 x 30 mA
Limiting inductive switch-off voltages ext. power supply voltage +1 V
Analog inputs
Binary outputs