Mounting
Application Module FM 458-1 DP - User Manual 3-5
A5E01078222-02 Edition 03.2009
Place the FM 458-1 DP and the first expansion module on a flat surface
and carefully connect the modules, so that the connector of the
expansion module is inserted, with all of its pins, exactly into the socket
of the FM 458-1 DP module.
When required, insert the second expansion module in the parts which
have been plugged together
Screw the cover plate onto the open LE bus connector of the right-hand
expansion module.
Fig. 3-4 Plugging the modules together (schematic diagram)
!
WARNING
The connector pins can be damaged if the modules are not correctly
lined-up when connecting. The modules must be carefully lined-up with
one another before plugging together.
Plugging the
modules together
To Next Page
Loading...
