Application and Operation
6.5 Command Generator
Product User Manual
Operating Instructions, Version AE 12/2009, A5E01454341C
121
established by the end user. Provisions are included for multiple sets of acceleration and
deceleration settings. The control provides a means to use any one of three separate menu-
defined acceleration/deceleration sets, or PLC network control as selected by the SOP.
6.5.6 Speed Limit
The Speed Limit simply limits the final output of the demand shaping chain to within preset
operating limits defined by the user. Provisions are included for multiple sets of forward
rotation maximum/minimum limits, and reverse rotation maximum/minimum limits. The
control provides a means to use any one of three separate menu-defined speed limit sets, or
PLC network control as selected by the SOP.
To Next Page
Loading...
Need help?
General