Siemens 7SR18 Solkor - Binary Input Meters

7SR18 Instrumentation Guide
Unrestricted Page 12 of 14 ©2018 Siemens Protection Devices Limited
Instrument
Description
Mean 0.00V
V Phase C Demand
Max 0.00V
Min 0.00V
Mean 0.00V
Shows the Max, Min and Mean Voltage for Phase AC.
V Phase AB Demand
Max 0.00V
Min 0.00V
Mean 0.00V
Shows the Max, Min and Mean Voltage for Phase AB.
V Phase BC Demand
Max 0.00V
Min 0.00V
Mean 0.00V
Shows the Max, Min and Mean Voltage for Phase BC.
V Phase CA Demand
Max 0.00V
Min 0.00V
Mean 0.00V
Shows the Max, Min and Mean Voltage for Phase CA.
Power P 3P Demand
Max 0.0W
Min 0.0W
Mean 0.0W
Shows the Max, Min and Mean for Power P 3P Demand.
Power Q 3P Demand
Max 0.0VAr
Min 0.0VAr
Mean 0.0VAr
Shows the Max, Min and Mean for Power Q 3P Demand.
Power S 3P Demand
Max 0.0VA
Min 0.0VA
Mean 0.0VA
Shows the Max, Min and Mean for Power S 3P Demand.
Frequency Demand
Max 0.000Hz
Min 0.000Hz
Mean 0.000Hz
Shows the Max, Min and Mean for System Frequency Demand.
Power Factor Demand
Max 0.00
Min 0.00
Mean 0.00
Shows the Max, Min and Mean for System Power Factor Demand.
1.14 Binary Input Meters
Instrument
Description
--------------------
BINARY INPUT METERS
> to view
--------------------
This is the sub-group that includes all the meters that are associated with the
Binary inputs TEST/RESET ► allows access to this sub-group
BI 1-6 ------
Displays the state of DC binary inputs 1 to 6 (The number of binary inputs
may vary depending on model)