Siemens ARCADIS Orbic Quick Guide

ARCADIS Orbic Quick Guide
NaviLink 2D/3D
127
Procedure
Preparation
✧ Set up the C-arm and the navigation sys-
tem and start both systems.
✧ Enter the patient data.
✧ Establish direct communication with the
aid of a network cable.
➭ The readiness of the C-arm is indicated
by an icon in the status bar of the
Examination task card (1).
✧ Select the examination parameters.
Procedure
✧ Release radiation.
➭ The image appears in the References
task card at the monitor trolley.
✧ Check the setting and image quality.
If necessary, repeat the exposure.
✧ Confirm the selection of the image at the
navigation system by clicking Request
image.
➭ The image is automatically transferred
from the C-arm to the navigation system.
✧ Make further exposures until you have
reached the desired number of images for
navigation.
Final steps
✧ If necessary, dismantle the C-arm and
take it out of the room.

Siemens ARCADIS Orbic Specifications

General

Brand	Siemens
Model	ARCADIS Orbic
Category	Medical Equipment
Language	English