Siemens Argus 7SR22 - Page 120

7SR210 Instrumentation Guide
Unrestricted Page 8 of 12 © 2018 Siemens Protection Devices Limited
1.3. Thermal Meters
Instrument Description
--------------------
THERMAL METERS
> to view
This is the sub-group that includes all the meters that are associated with
Thermal TEST/RESET ► allows access to this sub-group
Thermal Status
Phase A 0.0%
Phase B 0.0%
Phase C 0.0%
Displays the thermal capacity
1.4. Auto-Reclose Meters
Instrument Description
--------------------
AUTORECLOSE METERS
> to view
--------------------
This is the sub-group that includes all the meters that are associated with
Autoreclose TEST/RESET ► allows access to this sub-group. Only seen on
models that have the 79 option
Autoreclose Status
Out Of Service
Close Shot 0
Status of the autoreclose.
1.5. Maintenance Meters
Instrument Description
--------------------
MAINTENANCE METERS
> to view
--------------------
This is the sub-group that includes all the meters that are associated with
Maintenance TEST/RESET ► allows access to this sub-group
CB Total Trips
Count 0
Target 100
Displays the number of CB trips experienced by the CB
CB Phase A Trips
Count 0
Target 100
Displays the number of CB Phase A Trips experienced by the CB
CB Phase B Trips
Count 0
Target 100
Displays the number of CB Phase B Trips experienced by the CB
CB Phase C Trips
Count 0
Target 100
Displays the number of CB Phase C Trips experienced by the CB
CB Phase E/F Trips
Count 0
Target 100
Displays the number of CB Phase E/F Trips experienced by the CB
CB Delta Trips
Count 0
Target 100
Displays the number of CB trips experienced by the CB