7SR220 Settings Guide
Unrestricted Page 74 of 107 © 2013 Siemens Protection Devices Limited
Description Range Default
BI 12 Pick-up Delay
Delay on pickup of DC Binary Input 12
0, 0.005 ... 14300, 14400 0.02 s
BI 12 Drop-off Delay
Delay on dropoff of DC Binary Input 12
0, 0.005 ... 14300, 14400 0 s
BI 13 Pick-up Delay
Delay on pickup of DC Binary Input 13
0, 0.005 ... 14300, 14400 0.02 s
BI 13 Drop-off Delay
Delay on dropoff of DC Binary Input 13
0, 0.005 ... 14300, 14400 0 s
Enabled In Local
Selects which inputs are enabled when the relay is in
Operating Mode 'Local' or 'Local Or Remote'
Combination of ( 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13 )
1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12,
13
Enabled In Remote
Selects which inputs are enabled when the relay is in
Operating Mode 'Remote' or 'Local Or Remote'
Combination of ( 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13 )
1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12,
13
3.12.4. Function Key Config
Description Range Default
Function Key 1 Text
User definable text that will be used in the HMI function key
confirmation screen when Function key 1 is pressed.
(20 Character String) Function Key 1
Function Key 2 Text
User definable text that will be used in the HMI function key
confirmation screen when Function key 2 is pressed.
(20 Character String) Function Key 2
Function Key 3 Text
User definable text that will be used in the HMI function key
confirmation screen when Function key 3 is pressed.
(20 Character String) Function Key 3
Function Key 4 Text
User definable text that will be used in the HMI function key
confirmation screen when Function key 4 is pressed.
(20 Character String) Function Key 4
Function Key 5 Text
User definable text that will be used in the HMI function key
confirmation screen when Function key 5 is pressed.
(20 Character String) Function Key 5
Function Key 6 Text
User definable text that will be used in the HMI function key
confirmation screen when Function key 6 is pressed.
(20 Character String) Function Key 6
Enabled In Remote
Selects which inputs are enabled when the relay is in
Operating Mode 'Remote' or 'Local Or Remote'
Combination of ( 1, 2, 3, 4, 5, 6 ) ------
To Next Page
Loading...
