7SR210 Settings Guide
Unrestricted Page 38 of 61 © 2018 Siemens Protection Devices Limited
Description Range Default
E/F Out
Selects which inputs will switch out the E/F protection
elements.
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
E/F In
Selects which inputs will switch in the E/F protection elements.
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
SEF Out
Selects which inputs will switch out the SEF protection
elements
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
SEF In
Selects which inputs will switch in the SEF protection
elements
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Trigger Wave Rec
Selects which inputs can trigger a waveform record
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Trigger Fault Rec
Selects which inputs can trigger a fault record
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 1
Switches active setting group to group 1
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 2
Switches active setting group to group 2
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 3
Switches active setting group to group 3
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 4
Switches active setting group to group 4
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 5
Switches active setting group to group 5
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 6
Switches active setting group to group 6
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 7
Switches active setting group to group 7
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Select Group 8
Switches active setting group to group 8
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Out Of Service Mode
Selects which inputs will put the relay into Out Of Service
Mode
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
Local Mode
Selects which inputs will put the relay into Local Mode
Combination of ( BI1, BI2, BI3, BI4,
BI5, BI6, BI7, BI8, BI9, V1, V2, V3,
V4, V5, V6, V7, V8, V9, V10, V11,
V12, V13, V14, V15, V16 )
----------------------
---
To Next Page
Loading...
