Siemens Argus 7SR22 - Page 204

7SR220 Instrumentation Guide
© 2017 Siemens Protection Devices Limited Page 19 of 20
1.17. Virtual Meters
Instrument Description
--------------------
VIRTUAL METERS
> to view
--------------------
This is the sub-group that shows the state of the virtual status inputs in the relay
TEST/RESET ► allows access to this sub-group
V 1-8 ---- ----
V 9-16 ---- ----
Displays the state of Virtual Outputs 1 to 16 (The number of virtual inputs will
vary depending on model)
1.18. Communication Meters
Instrument Description
--------------------
COMMUNICATI
ON METERS
> to view
--------------------
This is the sub-group that includes all the meters that are associated
with Communications ports TEST/RESET ► allows access to this
sub-group
COM1
COM2
COM3
COM4
Displays which com ports are currently active
COM1 TRAFFIC
Tx1 0
Rx1 0
Rx1 Errors 0
Displays traffic on Com1
COM2 TRAFFIC
Tx2 0
Rx2 0
Rx2 Errors 0
Displays traffic on Com2
COM3 TRAFFIC
Tx3 0
Rx3 0
Rx3 Errors 0
Displays traffic on Com3
COM4 TRAFFIC
Tx4 0
Rx4 0
Rx4 Errors 0
Displays traffic on Com4
EN100 INFORMATION
Version : EN100 Version Info
Part# BF1111111111
Displays EN100 information
Network Config
Mac 00000000
IP 000.000.000.000
NM 255.255.255.000
Displays EN100 network information
Gateway: 000.000.000.000
EN100 NTP info:
EN100 Link ½ status info:
EN100 Rx/Tx Count
Displays further EN100 61850 information
En100 Rx/Tx Error
En100 Rx/Tx 10s
CPU Load %
EN100 Info Meters : 1-n
Displays further EN100 61850 information