Chapter 4 - Data Communications Definitions
© 2017 Siemens Protection Devices Limited Chapter 4 - Page 73 of 96
Binary Output Status Points
Static (Steady-State) Object Number: 10
Change Event Object Number: 11
Control Relay Output Blocks (CROB) Object Number: 12
Binary Output Command Event Object Number: 13
Static Variation reported when variation 0 requested: 1 (Binary Output w/o status)
or 2 (Binary Output with status)
Change Event Variation reported when variation 0 requested: 1 (Binary Output Event w/o Time)
or 2 (Binary Output Event with Time)
Command Event Variation reported when variation 0 requested: 1 (Command Status w/o Time)
or 2 (Command Status with Time)
Point
Description
Index
Default
Change
Event
Assigned
Class
(1, 2, 3
or none)
Default
Variation
Static
Object 10
Default
Variation
Event
Object 11
Default
Command
Event
Object 13
Assigned
Class
(1, 2, 3
or none)
Default
Variation
Command
Event
Object 13
CROB
Supported
Operations
Default
CROB
Operations
34 Settings Group 1 0 2 2 0 1
Pulse On
Latch On
Close
Latch On
35 Settings Group 2 0 2 2 0 1
Pulse On
Latch On Latch On
Close
Pulse On
36 Settings Group 3 0 2 2 0 1 Latch On Latch On
Close
37 Settings Group 4 0 2 2 0 1
Pulse On
Latch On Latch On
Close
Pulse On
38 Settings Group 5 0 2 2 0 1 Latch On Latch On
Close
39 Settings Group 6 0 2 2 0 1
Pulse On
Latch On
Close
Latch On
40 Settings Group 7 0 2 2 0 1
Pulse On
Latch On
Close
Latch On
41 Settings Group 8 0 2 2 0 1
Pulse On
Latch On
Close
Latch On
42 Auto-reclose on/off 0 2 2 0 1
Pulse On
Pulse Off
Latch On
Latch Off
Close
Trip
Pulse On
Pulse Off
Latch On
Latch Off
43 Hot Line Working on/off 0 2 2 0 1
Pulse On
Pulse Off Pulse On
Latch Off
Latch On
Close Latch Off
Trip
Pulse On
Pulse Off Pulse On
44 E/F Out on/off 0 2 2 0 1
Latch Off
Latch On
Close Latch Off
Trip
45 SEF Out on/off 0 2 2 0 1
Pulse On
Pulse Off
Latch On
Latch Off
Pulse On
Pulse Off
Latch On
Latch Off
To Next Page
Loading...
