Structure and function
17
Building Technologies A6V10209291_f_en_--
Fire Safety & Security Products 05.02.2010
Software can be used to set the detection behavior of the Technical CO Alarm
regardless of the ASA parameter sets for fire.
Software can be used to set temperature or CO ambient supervision with
hysteresis.
Detection of carbon monoxide (CO) at concentrations of 5 ppm CO or more
(MAK value=30 ppm CO)
Alarm indicator (red LED)
Check the version of your FS20 control panel. Some features are only available
as of certain versions. For details, see List of compatibility.
See also
Features of fire detection functionality [ 18]
Features of the Technical CO Alarm [ 20]
Features of the Technical Ambient Supervision Alarm [ 22]
Compatibility [ 33]
To Next Page
Loading...
