Siemens FDOOTC241 - Features of the Technical Ambient Supervision Alarm; Details for Ordering

Structure and function
22
Building Technologies A6V10209291_f_en_--
Fire Safety & Security Products 05.02.2010
3.1.3 Features of the Technical Ambient Supervision Alarm
In 'Technical Ambient Supervision Alarm' mode, the neural fire detector
FDOOTC241 can detect an increase in temperature or CO concentration caused
by hysteresis above a specified threshold value. The control panel is used to
configure the parameters.
°C
CO
Warning level for
Technical Ambient
Supervision Alarm
Result
Signal analysisSensory
Algorithms
Environment:
CO or
temperature
Signal processing by the Technical Ambient Supervision Alarm
NOTICE
The system is not controlled as laid down in EN 54-2
Infringement of the EN 54-2 standard
 The signals for CO detection or temperature recording must not be used to
control fire detection equipment in accordance with EN 54-2.
The 'Technical Ambient Supervision Alarm' function is only supported by
FDOOTC241 neural fire detectors with ES ≥ 43.
See also
 Technical Ambient Supervision Alarm [ 53]
3.1.4 Details for ordering
Type Order no. Designation
FDOOTC241 S54311-F1-A1 Multisensor fire detector