Siemens FDOOTC241 - Addressed Sounder Base FDSB291; Base Attachment FDB291; Base Attachment Humid FDB293

Structure and function
35
Building Technologies A6V10209291_f_en_--
Fire Safety & Security Products 05.02.2010
3.6.3 Addressed sounder base FDSB291
 For acoustic alarming in the case of an event
 For the FDnet detector line
 Orange terminal block
 With two micro terminals
 For the recess-mounted cable entry
 For the surface-mounted cable entry, up to 6 mm
cable diameter
 Compatible with:
– Neural fire detector FDOOT2xx
– Neural fire detector FDOOTC2xx
– Wide-spectrum smoke detector FDO2xx
– Heat detector FDT2xx (as of ES ≥43)
 For details, see document 007025
 Order no.: A5Q00001647
3.6.4 Base attachment FDB291
 For the surface-mounted cable entry, as of 6 mm
cable diameter
 Compatible with:
– Detector base FDB2x1/FDB2x1-AA
– Flat detector base FDB2x2
 Order no.: A5Q00001603
See also
 Base attachment FDB291 [ 60]
3.6.5 Base attachment humid FDB293
 For installation in humid, wet environments and if
the detector heating unit is used
 Protection category achievable: IP54
 Six break-out points for M20 x 1.5 metal cable
glands
 Compatible with:
– Detector base FDB2x1/FDB2x1-AA
– Flat detector base FDB2x2
– Detector heating unit FDBH291
– Designation plate DBZ1193A
– M20 x 1.5 metal cable gland
 Order no.: A5Q00003945
See also
 Base attachment humid FDB293 [ 61]