Siemens FDOOTC241 - Mechanical Setup; Compatibility

Structure and function
33
Building Technologies A6V10209291_f_en_--
Fire Safety & Security Products 05.02.2010
3.4 Mechanical setup
To install a fire detector, a detector base is always required. After mounting the
detector base the fire detector is simply screwed into the base by hand, with the
detector exchanger or with the detector exchanger and tester.
Fire detector installation
Properties
 Quick installation and reliable contact due to screwless terminals
 Insertion of the insulated wires without any tools
 The centered alarm indicator makes an alignment of the detector base
superfluous
 Space for up to 6 auxiliary terminals for connecting detector heating units,
shielded cables etc.
Accessories are available for the various applications.
See also
 Accessories [ 34]
 Mounting / Installation [ 57]
3.5 Compatibility
The neural fire detector FDOOTC241 is compatible with FS20 control panels.
For details see 'List of compatibility'.
Limitations to compatibility
 The 'Technical Ambient Supervision Alarm' is available from an ES ≥ 43.