Siemens G120P Technical Manual

About this documentation
Product documentation
2
8
| 98
Siemens
A5E36496664A_d
Building Technologies
2016-03-17
2.2 Product documentation
Title
Description
Source/Document ID
Operating Manual Design, installation, commissioning
and troubleshooting the SINAMICS
G120P.
A5E36496664A
Getting Started Guide
Power Module PM230
Hardware IP55
Quick guide with dimensions and
design and installation notes.
A5E35100000A
Getting Started Guide
Power Module PM230
Hardware IP20
Quick guide with dimensions and
design and installation notes.
A5E33582380A
Hardware Installation
Manual
Power Module PM230
Hardware IP55
Guide with all the information needed
to install, mount, connect, and service
SINAMICS G120P systems.
A5E35319202A AA
Hardware Installation
Manual
Power Module PM230
Hardware IP20
Guide with all the information needed
to install, mount, connect, and service
SINAMICS G120P systems.
A5E34331322A AA
Application examples See link for application examples and
information on use of variable speed
drives
http://support.automation.siemens.co
m/WW/view/en/20208582/136000
General product
information
See link for detailed information and
support tools for variable speed
drives.
http://www.siemens.com/g120p
Operating Instructions
Control Unit
Guide for installation engineers,
commissioners, and operators on
Control Unit CU230P-2.
A5E34257946A AC
Function Manual,
Fieldbus systems
Instructions for operation when
connected to a fieldbus system.
A5E34229197A AC
List Manual
Control Unit
Manual with list information including
parameters and error codes.
A5E33838102
Desigo Information on commissioning and
integrating into Desigo systems
including parameter settings.
CM110576
PICS SINAMICS BACnet Protocol
Implementation Conformance
Statement.
CM2Y5111
Data sheet:
Supplementary
system components
Data sheet with general information
on the IOP and BOP-2 operator
panels and the blanking cover.
CM1N5116en
SINAMICS G120P
operation in the event
of a fire
Use of Essential Service Mode (ESM). Entry ID: 63969509
Bundle Sheet Installation Instructions FSA…FSF A5E32294594A Index AC
Line Filters Installation Instructions FSA…FSC A5E03879697A AB
Line Filters Installation Instructions FSD…FSF A5E31327192A AB

Siemens G120P Specifications

General

Power Range	0.37 kW to 630 kW
Control Type	Vector control, V/f control
Protection Class	IP20
Integrated Safety	STO (Safe Torque Off)
Frequency Range	0 Hz to 650 Hz
Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Cooling Method	Air cooling
Output Voltage	3-phase, 0 V to input voltage